Description:

It’s a solution of mineral salts that colors any concrete elements by a chemical reaction, that penetrates in the surface and guaranty its stay during all the useful life’s concrete. CRINK acid stain gives beauty and color to dry concrete without modify its texture and allow seeing the concrete essence and durability.

CRINK acid stain is perfect for polished concrete floors, plain or hammers blow columns, bath and kitchen bars, also concrete decorative elements for waking road and gardens. Improve the concrete appearance in a very cheap and quick way, it is a material that lets create own styles and unique styles with a great quality.

There are a great variety of tones enough to create beautiful labors.
It is easy to apply with very conventional tools such as sponge, brush, paintbrush or liquid sprayer.
It is easy to clean

Performance

The CRINK acid stain 4 liter container has an average performance of 60mt2.

Storage and useful life

Keep CRINK acid stain in its original container in a fresh place.
The CRINK acid stain useful life does not expire if it is close all the time.
Once it is open its useful life is limited to the product reaction with the surrounding, for that reason it is recommended do not leave it open for more than 6 months.

Physic properties

Appearance Translucent liquid in different colors
Solubility Water soluble
Safety Lightly corrosive, not combustible

CRINK acid stain can cause eyes and skin irritation, avoid the contact wearing appropriate clothes, glasses and mask and protection gloves.

Installation

Clean the surface to be treated and be sure it is free of dust, oil, paint and filth. For cleaning the surface use any commercial detergent or degreaser and water.
The surface must be complete dry to receive CRINK acid stain.

CRINK acid stain applies directly over the surface. CRINK acid stain could be diluted in water to 100%, this is, one part of water by another equal of CRINK acid stain.
Apply the solution over the concrete with a liquid sprayer, sponge, brush, paint brush or a cloth. Depending of the tool used to apply, it will be the finish such as a uniform or scratch coloring.

The surface must be damped with CRINK acid stain, do not leave excess in the discontinued movements. When CRINK acid stain touch the concrete immediately begins the coloring reaction that will takes 6 hours to get the maximum coloration.
If is desired can be applied a second coat, waiting 2 hours between one and another.

The chemical reaction is evident because CRINK acid stain bubbles when it touches the surface, this reaction leaves the surface dirty and dusty. After 6 hours clean the surface with a damped cloth, leave it dry and seal with CREA Seal.
The use of CREA Seal guarantees the color permanence for longer in the surface.

Limitations

Do not use hydrochloric acid and/or chlorine to prepare and clean the surface.
It is not recommendable to use color green or blue outer.

Guaranty

CREA offers a limited guaranty to color tone conditions and quantity per unit. CREA will only replace the portion of product proven to be defective. CREA is not responsible for the incorrect installation made by the constructor, possible damages, injures or economical losses caused for an incorrect installation of the product. This product must be installed only for a professional constructor.