|
Description:
KLINGRAF is a sealer made from silicone resins and teflon, that makes the graffiti cleaning easier, if it was made with spray acrylic paints
KLINGRAF protects the stamped wall, stone, quarry, clay, block or painted wall.
Use and applying:
- Make sure the wall is clean and dried
- Mix the part A with the part B of KLINGRAF shacking for around 3 minutes to make sure you get a homogeneous mixing.
- Apply KLINGRAF with a brush or a roller, even an air gun. Let the first layer to dry before you check if a second layer is necessary. (For some porous walls is normally necessary).
- Now the wall is protected against graffiti.
- If the wall gets graffiti just clean it with any regular solvent such as thinner.
- Check every year to see if a “resealing” is necessary, you will know so if the wall has lost the KLINGRAF brightness.
Benefits and Characteristics:
- Protects the wall from the blurring make for the ultraviolet beams
- Repels wetness, greases and graffiti.
- There can be used in stamped Walls, stone, quarry, mud, ashlar and / or block.
- It’s applied by brush, roller or air gun.
Performance and Presentation:
KLINGRAF part A is presented in 4.5 carafes and the part B in 0.50lts packages with a average performance of 25 square meters in fine ends and 18 sm in very open pores ends.
Time to dry:
- 2 hours outside.
- 4 hours inside.
Important recommendations
Keep it off form kids.
Apply it on wide open places.
Use protection for eyes, nose, and mouth.
Avoid to eat it or to touch your eyes.
Do not dilute it or mix with any other thing.
Klingraf should be always covered and in a dry and clean place.
|
 |
